Morphostructural studies of pure and mixed metal oxide nanoparticles of Cu with Ni and Zn

Abstract

Nano-scale interactions between pure metal or metal-oxide components within an oxide matrix can improve functional performance over basic metal oxides. This study reports on the synthesis of monometallic (CuO), bimetallic (CuO–NiO) and trimetallic (CuO–NiO–ZnO) oxide nanoparticles (NPs) via the co-precipitation method and investigation of morphostructural properties. All of the synthesized metal oxide NPs were calcined at 550 °C temperature and annealed under vacuum. In this work, we applied Scherrer formula, modified Scherrer equation, Williamson-Hall plots, and Halder-Wagner plots to calculate the average crystallite size. The XRD data analysis showed that average crystallite sizes of the as-synthesized metal oxide phases were between 4 nm and 76 nm and average diameters calculated from SEM image were between 15 nm and 83 nm. The XRD studies also disclosed that average crystallite size and lattice microstrain of the CuO phases remain almost same (43 nm–46 nm and 2.074×10−3 to 2.665×10−3) for pure CuO and mixed CuO–NiO; but in case of mixed CuO–NiO–ZnO it is found to decrease in size to 11 nm where lattice microstrain increases to 9.653×10−3. Line broadening of diffraction peaks from microstrain contribution was between 0.02 and 0.01. Degree of crystallinity (%) of CuO phases found to decrease from 81 to 71. Dislocation density of CuO phases found to increase from 6.63×10−4nm−2 to 12.68×10−3nm−2. X-ray density of CuO phases increased from 6.48 to 6.53 g/cm3. Where this calculated small dislocation density well agreed with the high crystallinity. Crystal structure and specific surface area were determined from lattice constants and X-ray density. These synthesized nanopowders showed the existence of monoclinic, cubic, and hexagonal phases. The obtained NPs of multi-metal oxide explained more than one phases with different size, shape, and morphology at nano scale.