Abstract
AbstractPoly(ethylene terephthalate) (PET) nanocomposite films containing two different organoclays, Cloisite 30B® (C30B) and Nanomer I.28E® (N28E), were prepared by melt blending. In order to increase the gallery spacing of the clay particles, a sulfopolyester (PET ionomer or PETi) was added to the nanocomposites via a master‐batch approach. The morphological, thermal and gas barrier characteristics of the nanocomposite films were studied using several characterization techniques such as scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, differential scanning calorimetry, dynamic mechanical analysis, rheometry and oxygen permeability. PET and PETi were found to form immiscible polymer blends and the nanoparticles were preferentially located in the PETi dispersed phase. A better dispersion of clay was obtained for nanocomposites containing N28E with PETi. On the contrary, for nanocomposites containing C30B and PETi, the number of tactoids increased and the clay distribution and dispersion became worse than for C30B alone. Overall, the best properties were obtained for the PET/C30B nanocomposite without PETi. Higher crystallinity was found for all nanocomposite films in comparison to that of neat PET. © 2012 Society of Chemical Industry
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
