Morphology and origin of liquefaction-related sediment failures on the Yellow River subaqueous delta

Abstract

Subaqueous slopes of many actively prograding deltas are heavily modified by widespread submarine sediment failures, forming highly complex geomorphic features that undergo continuous evolution even over short time scales. However, the effects of wave-seabed interactions (especially liquefaction) on the evolution of seabed sediment failures are rarely studied. Here, we use side-scan sonar, sub-bottom profilers, multibeam bathymetry, and in situ and laboratory geotechnical tests to map the bottom morphology and sediment structure of the Yellow River subaqueous delta. Our results indicate that: 1) The morphology along the Yellow River subaqueous delta is highly complex and can be categorized as a moderately disturbed area and heavily disturbed area; 2) Heavily disturbed area shows notable lines of evidences of liquefication-related sediment failure and four separate morphological zones (Zones 1–4). Zone 1 consists of differently sized sediment highs, which considered to be scarp or monadnock features. Zone 2 undulates with widely distributed tabular sediment blocks, gullies, and small-scale seafloor irregularities. Zone 3 is characterized by irregular, elongate sediment ridges. Finally, Zone 4 is characterized by relatively flat terrain with some localized highs; 3) Sub-bottom profiles used to visualize failure features in Zone 1 show acoustically continuous high-amplitude parallel or subparallel reflection, and the geomorphic features in this area are mainly caused by erosion. In comparison, Zones 2, 3 and 4 lack internal structures and display chaotic/disturbed signatures in corresponding sub-bottom data, which might be an indication of liquefaction; and 4) A combination of preconditioning and triggering factors lead to sediment failures and the complex morphological features in this area; however, silt liquefaction under storm conditions is the most important controlling factor. Based on this evidence, we propose formation mechanism for the liquefaction-related sediment failure features in this area. Sediment liquefaction forms an initial depression and gully when fine particles are resuspended along the arc-shaped liquefaction boundary as sediment vents and re-solidification of the liquefied sediment leads to a stiffer bed. Gullies are then widened and deepened by the predominant currents, and the disturbed depressions develop into elongated highs because of the denser structure and higher strength following liquefaction. While disturbed by engineering activities, the sediment highs become fragmented due to intense localized erosion, having the potential for downslope transport and the formation of sediment ridges. The geometries and distributions of the sediment failure features on the Yellow River subaqueous delta provide insights into process mechanisms and causative factors, especially when compared with other, similar phenomena reported elsewhere.