Morphology and melting behavior of semicrystalline poly(ethylene terephthalate). II. Annealed PET

Abstract

AbstractAnnealing of poly(ethylene terephthalate) samples crystallized under isothermal conditions above the crystallization temperature has a marked influence on their morphology and results in increased thermal stability of the crystalline structure as indicated by the melting point increase of the samples. The morphological transformation processes induced by annealing are very complex and depend on the thermal history of the samples, i.e., crystallization temperature and heating procedure. Depending on the nature of the processes occurring during annealing, various parameters characterizing the semicrystalline state of the samples can be affected such as the degree of crystallinity, the long spacing, the thickness of amorphous and crystalline layers, the crystal perfection, the fold‐surface structure, and the mosaic structure of the crystalline lamellae. Annealing involves a solid‐state transformation of the original crystalline structure including crystal perfection without thickening or a melting followed by recrystallization with crystal perfection and crystal thickening. The combination of differential scanning calorimetric (DSC) measurements and small‐angle x‐ray scattering is a powerful analytical tool to detect morphological changes and helps in deciding on the processes which are involved in the transformation of the microstructure upon annealing.