Morphology and mechanical properties of PA6/organoclay nanocomposites toughened by bulk rubber and core-shell rubber

Abstract

Reactive bulk rubber (EOR-g-MA) and reactive core-shell rubber (ABS-g-MA) are selected as toughening agents to toughen PA6 nanocomposites. The two blends are designed with 20 wt-% rubber phase and 3 wt-% organoclay. X-ray diffraction, transmission electron microscopy and scanning electron microscopy were used to evaluate the degree of exfoliation of organoclays and morphology of the nanocomposites. The organoclay platelets are well exfoliated in the nanocomposites. At the same time, the size of the elastomer particles and interfacial adhesion between polyamide 6 and elastomers are dramatically affected by the existence of organoclay. ABS-g-MA is found to promote the toughness efficiency of PA6 than does EOR-g-MA, which reveals higher impact strength and elongation at break. However, tensile strength and Young's modulus of PA6 blends based on EOR-g-MA elastomer are higher than those based on ABS-g-MA elastomer.