Morphological studies of (polyamide‐6)/(silane‐grafted high‐density polyethylene)/nanoclay ternary nanocomposites

Abstract

In this work, the influence of organoclay incorporation along with silane grafting of high‐density polyethylene (HDPE) on compatibilization and morphology of HDPE/(polyamide‐6) (PA6) blends was investigated. Analysis by Fourier‐transform infrared spectroscopy was done for the investigation of grafting efficiency of specimens. Scanning electron microscopy and thermal properties (diffraction scanning colorimetry) were examined to study the effect of silane grafting as well as adding organoclay in compatibilizing blends. Small‐angle X‐ray scattering, transmission electron microscopy, and dynamic rheology (Rheometric Mechanical Spectrometer) were also used to explain morphological changes. The results of scanning electron microscopy indicated that silane‐grafted HDPE had hydrophilic characteristics and therefore was more compatible with PA6 than neat polyethylene. Furthermore, in the same way, adding nanoclay to this blend resulted in more uniform and finer morphology. Results of diffraction scanning colorimetry confirmed the compatibilizing effect of both silane grafting of polyethylene and use of organoclay in blends by showing a strong deviation of separate melting peak of PA6 in the composites to reduced intensity and shift to lower temperatures. J. VINYL ADDIT. TECHNOL., 21:191–196, 2015. © 2014 Society of Plastics Engineers