Abstract
The use of Ca-based sorbents in circulating fluidized beds (CFB) allows the in-situ desulfurization in oxy-fuel combustion processes. The sulfation process involves important changes in the sorbent morphology, which could vary depending on the operating conditions and be different to those observed in conventional air combustion. This work analyzes the morphological variations observed during limestone and dolomite sulfation at typical oxy-fuel combustion conditions (high CO2 concentration, higher temperatures than in air combustion) in CFB combustors (long reaction times). Sulfated samples prepared in a thermogravimetric analyzer were analyzed by Scanning Electron Microscope (SEM). The space limitations due to the higher molar volume of CaSO4 compared to CaO in the external surface of the particles make that the CaSO4 product layer trend to grow outwards to form a honeycomb-shaped structure. This structure appeared for limestone at both calcining and non-calcining conditions. A strong effect of the CaSO4 sintering phenomenon was observed at temperatures above 950°C. Moreover, the honeycomb structure was never observed working with dolomite in spite of the high sulfation conversions reached with this sorbent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
