Abstract
During production, solar cells undergo significant thermomechanical loadings that lead to permanent deformations before being laminated in photovoltaic (PV) modules. One of these thermomechanical production processes is cofiring. In this work, the permanent deformation of solar cells after the cofiring process was investigated. The experimental measurements revealed a great scatter in the measured deflection at the deformed edges of the polycrystalline silicon solar cells after the cofiring process. A finite element (FE) framework was developed to investigate factors contributing to this scatter. The framework predicts the multistable response of the solar cell to the thermomechanical loading of the cofiring process. It accounts for the uncertainties arising from the heterogeneity of the polycrystalline silicon layer (grain orientations and non-uniform grain sizes) and uncertainties regarding the layer thicknesses of the silicon and aluminum paste. Employing the developed framework in a Monte-Carlo simulation the relative significance of the mentioned uncertainties on the deflection at the solar cell edge after the cofiring process was analyzed. Numerical results for a commercially produced polycrystalline silicon solar cell were compared with an analytical model and validated with experimental measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
