Monotonic mechanical properties of plasma nitrided 316L polycrystalline austenitic stainless steel: Mechanical behaviour of the nitrided layer and impact of nitriding residual stresses

Abstract

The impact of plasma nitriding at 400°C on the monotonic mechanical behaviour of 316L austenitic stainless steel at room temperature has been investigated. It is shown that the residual stresses in the nitrided layer lead to a tension–compression anisotropy whose magnitude depends on the residual stresses intensity and extension (i.e. thickness of the nitrided layer). Using the stress differential technique, average residual stresses in the nitrided layer ranging from −1.5 up to −3GPa were measured. The local mechanical behaviour of the nitrided layer has also been investigated through SEM in situ tensile tests. A quasi-brittle mechanical behaviour of the nitrided layer is observed with first evidences of crack initiation for plastic strains below 1%, whatever the nitrided layer. By increasing the total applied strain up to 20%, a progressive segmentation of the layer occurs. The crack initiation location mainly depends on the local nitrided thickness.