Monotonic and cyclic behaviour of sand in direct simple shear test conditions considering low stresses

Abstract

Many geotechnical problems, such as buried pipeline–soil interaction and wave loading on sand seabeds, require the soil behaviour at relatively low effective stresses as compared to that in typical geotechnical practice. Monotonic and cyclic direct simple shear (DSS) tests were conducted on dry sand under constant normal stress, ranging from 12.5 kPa to 400 kPa, to investigate the effects of confining pressure on stress–strain behaviour. The tests were conducted using a combined advanced dynamic cyclic simple shear apparatus, which has a high-precision feedback system for controlling and measuring the forces and displacements while maintaining a high level of accuracy, which is essential, especially for tests at low normal stresses. The monotonic test results with this advanced system show an increased shear to normal stress ratio, thereby the mobilized friction angle, at the low-stress level compared to that of high normal stresses, as observed in some previous studies. The cyclic test results show that the load–displacement behaviour and cyclic compaction are governed by the normal stress. The sand becomes densified when the applied shear strain amplitude is greater than its threshold value. In constant strain amplitude cyclic loading, the lower normal stresses result in higher compaction; however, an opposite trend exists in constant stress amplitude cyclic tests.