Abstract
The present work relates to the investigation of cobalt and manganese oxide based compositions as candidate materials for the storage of surplus energy, available in the form of heat, generated from high temperature concentrated solar power plants (e.g. solar tower, solar dish) via a two-step thermochemical cyclic redox process under air flow. Emphasis is given on the utilization of small structured monolithic bodies (flow-through pellets) made entirely from the two aforementioned oxides. As compared to the respective powders, and in addition to the natural advantage of substantially lower pressure drop that monolithic structures can offer, this study demonstrated that structured bodies can also improve redox kinetics to a measurable extent. Cobalt oxide was found to be superior to manganese oxide both from an estimated energy density and from a redox reactions kinetics point-of-view. Among the redox conditions studied, the optimum reduction-oxidation operating window for the former oxide was determined to be in the range of 1000-800°C, while for the latter material no clear conclusion was drawn with reduction reaching its maximum extent at 1000°C and oxidation occurring in the range of 500-650°C. In both cases, no significant degradation of redox performance was observed upon cyclic operation (up to 10 cycles), however manganese oxide showed notably slower oxidation kinetics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.