Abstract
The main aim of this study was to develop and monitor an effective and cost-efficient industrial wastewater treatment system that utilizes sand, fly ash, and hearth ash. The latter two are potentially available and inexpensive industrial waste materials that can be used for filtration. The infiltration percolation method was utilized in a vertical cylindrical column to filter the raw wastewater from a detergent manufacturing plant. The main parameters analyzed before and after treatment included suspended solids (SS), chemical oxygen demand (COD), biochemical oxygen demand (BOD5), and pH. The system successfully achieved significant reductions, including 89% in COD, 73% in BOD5, and 54% in suspended solids (SS), along with a 66% to 99% reduction in heavy metals. The COD/BOD5 rejection ratio decreased from above 4.24 before treatment to below 1.73 after treatment. Furthermore, impedance measurements were carried out across the frequency range of 100 to 1MHz. The analysis of complex conductivity spectra revealed two Cole-Cole relaxation behaviors, and an equivalent circuit was developed to extract the primary parameters and further investigate both relaxation processes. The results of the electrical parameters deduced from the impedance spectra demonstrated a strong correlation with the parameters obtained through conventional methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
