Abstract

There is a gap between lab experiments where resistivity–soil moisture relations are generally very good and field studies in complex environmental settings where relations are always less good and complicated by many factors. An experiment was designed where environmental settings are more controlled, the best outside laboratory, to assess the transferability from lab to outdoor. A field experiment was carried out to evaluate the use of electric resistivity tomography (ERT) for monitoring soil moisture dynamics over a period of 67 days. A homogeneous site in the central part of The Netherlands was selected consisting of grass pasture on an aeolian sand soil profile. ERT values were correlated to gravimetric soil moisture samples for five depths at three different dates. Correlations ranged from 0.43 to 0.73 and were best for a soil depth of 90 cm. Resistivity patterns over time (time-lapse ERT) were analyzed and related to rainfall events where rainfall infiltration patterns could be identified. Duplicate ERT measurements showed that the noise level of the instrument and measurements is low and generally below 3% for the soil profile below the mixed layer but above the groundwater. Although the majority of the measured resistivity patterns could be well explained, some artefacts and dynamics were more difficult to clarify, even so in this homogeneous field situation. The presence of an oak tree with its root structure and a ditch with surface water with higher conductivity may have an impact on the resistivity pattern in the soil profile and over time. We conclude that ERT allows for detailed spatial measurement of local soil moisture dynamics resulting from precipitation although field experiments do not yield accuracies similar to laboratory experiments. ERT approaches are suitable for detailed spatial analyses where probe or sample-based methods are limited in reach or repeatability.

Highlights

  • Soil moisture availability is a key factor in plant growth and vegetation development, both in natural systems and agricultural or plantation settings

  • Soil moisture is included in the list of essential climate variables (ECV) under the Global Climate Observing System [1] making it important to understand the dynamic processes of soil water uptake and re-distribution

  • In this paper we focus on electric resistivity tomography (ERT)

Read more

Summary

Introduction

Soil moisture availability is a key factor in plant growth and vegetation development, both in natural systems and agricultural or plantation settings. Monitoring water availability to vegetation is difficult because access to the soil profile to quantify moisture is restricted without disturbing the soil system. Common methods with sensors to determine soil moisture content are gravimetric methods [2], time domain reflectometry (TDR) [3], neutron probe [4], cosmic-ray. Sensors 2020, 20, 5313 neutron method [5], ground penetrating radar (GPR) [4,6] and electric resistivity tomography (ERT). Gravimetric measurements require coring into the deeper soil layers for sampling which is laborious, disturbs the soil body, and results in point (not spatial) observations. The neutron method is non-invasive and works at various spatial scales but it is difficult to separate the signal of soil moisture from vegetation and the deeper underground. In this paper we focus on electric resistivity tomography (ERT)

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.