Abstract

This letter presents analysis of frozen sea surface properties using low cost and low complexity terrestrial Global Navigational Satellite System (GNSS) receivers. Monitoring sea ice thickness and the mean sea level (MSL) of the frozen sea are performed using the interference frequency obtained by the GNSS interference pattern (IP) technique. The height variations between the GNSS antenna and the sea surface evaluated using the IP of the direct and reflected carrier-to-noise density ratio (C/N0) is used to find the corresponding MSL. The GNSS-R derived MSL for open sea conditions agreed well with the mareograph data with root-mean-squared error (RMSE) of 2.72 cm with R-squared value of 0.9644. For frozen sea, a notable difference was observed between the measured MSL and ground truth MSL values. This difference was caused by the combined thickness of snow and ice above the frozen sea surface, also known as the total freeboard. Assuming the conditions for hydrostatic equilibrium is satisfied, total freeboard was converted to ice thickness. The ice thickness values agreed well with the published ice charts by Finnish Meteorological Institute. The main uncertainty in the extracted ice-thickness was due to the thick snow accumulation and unknown snow properties.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call