Abstract
Scanning electrochemical microscopy (SECM) in feedback mode was applied to monitor changes in the electronic conductivity of a passive layer existing on a nanocrystalline Nd-Fe-B-type permanent magnet of the following composition, Nd13.5Fe79.5Si1B6 (where subscripts denote at. %). This model magnet being a complex multimetallic-phase material (fabricated according to the hydrogenation-disproportionation-desorption-recombination route) contained intrinsic iron inclusions, as evident from SEM and EDX mapping. SECM measurements performed in feedback mode using ferrocenecarboxylic acid as a mediator (in phosphate buffer at pH 7) in the presence and absence of chloride anions permitted evaluation of the local surface (passive layer) conductivity changes during pitting corrosion caused by Cl- anions. The spots of high conductivity (electronic or redox) act as precursor sites for initiation of pits. It can be rationalized that iron inclusions are responsible for the high susceptibility of Nd-Fe-B magnets to pitting corrosion. The approach is fairly general and allows localization of pitting precursor sites under different corrosion environments that include a wide range of concentrations of anions causing the passive layer breakdown.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
