Abstract
The paper presents results of an analysis of acoustic-emission (AE) signals obtained during laser cutting of a steel plates, which are frequently used in the production of automotive body components. In the course of laser cutting, continuous signals, which are related to the quality achieved of the laser cut, are measured. After laser cutting characteristic AE bursts in the specimen material, which are results of a thermal influence, can be detected. The presence of dross is an important indicator of poor quality of laser cutting. The investigation on laser cutting was conducted on an unalloyed steel DC04 sheet and on austenitic stainless steel X5CrNi18-10 sheet of 1.5 mm in thickness. The same physical mechanism in the cut formation at both steels, however, resulted in a considerable different cut quality, which was indicated by the AE signals captured after the cutting process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Machine Tools and Manufacture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
