Abstract
Abstract – Installation of the honepot sensor on Raspberry Pi device integrated with Modern Honey Network(MHN) is a DSSDI UGM action to see the threats of existing public Network, so it can be preventive action. But theinstalled Honeypot sensors sometimes have problems in the form of overload on the System so that data attacks arenot recorded. It is necessary to develop a monitoring System on the Honeypot System to monitor and manage Systemresources and to analyze Honeypot data needs. System monitoring which is one of the Network Management System(NMS) functions can be implemented with Simple Network Management Protocol (SNMP) to monitor theperformance of Honeypot sensor devices. From monitoring the Honeypot System shows the Honeypot sensor deviceoverloaded in memory. In addition, from the monitoring is seen the influence of the number of attacks on Systemperformance.
 Keywords - Honeypot, Modern Honey Network (MHN), Network Management System (NMS), Simple NetworkManagement Protocol (SNMP)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.