Abstract
Heavy metal lead (Pb2+) contamination in water poses a serious threat to human health, and developing some effective strategies for the removal of Pb2+ is urgent. Herein, molybdenum disulfide (MoS2) anchored peanut shell biochar (BC) composite adsorbents were successfully prepared by hydrothermal method and applied for the adsorption of Pb2+. Among these composites, the MoS2/BC-3 composite displayed the best adsorption performance with the adsorption capacity of 232 mg·g−1 at 30 °C. The adsorption procedure followed the pseudo-secondary kinetics and Freundlich adsorption model, indicating that the adsorption process of Pb2+ over MoS2/BC-3 composite was chemical and multilayer adsorption. Moreover, Pb2+ was spontaneously adsorbed by MoS2/BC-3, and the adsorption capacity increased with the enhance of temperature. The main mechanisms involved in the adsorption of Pb2+ by MoS2/BC-3 composite were found to include electrostatic interaction and complexation interaction. In addition, the MoS2/BC-3 composite had a good stability, and the Pb2+ removal rate could still reach more than 80 % after 6 cycles of adsorption experiments. Meanwhile, the adsorbent demonstrated a strong ability to absorb common heavy metals including copper and cadmium, further confirming that the MoS2/BC-3 composite had a potential value.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Colloids and Surfaces A: Physicochemical and Engineering Aspects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
