Molten salts for efficient removal of radioactive contaminants from stainless steel surface: Mechanisms and applications

Abstract

Here, we have demonstrated an innovative decontamination strategy using molten salts as a solvent to clean stubborn uranium contaminants on stainless steel surfaces. The aim of this work was to investigate the evolutionary path of contaminants in molten salts to reveal the decontamination mechanism, thus providing a basis for the practical application of the method. Thermodynamic analysis revealed that alkali metal hydroxides, carbonates, chlorides and nitrates can react with uranium oxides (UO3 and U3O8) to form various uranates. Notably, the decontamination mechanism was elucidated by analyzing the chemical composition of the contaminants in the molten salts and the surface morphology of the specimens considering NaOH–Na2CO3–NaCl melt as the decontaminant. The decontamination process involved two stages: a rapid decontamination stage dominated by the thermal effect of molten salt, and a stable decontamination stage governed by the chemical reactions and diffusion of molten salt. Subsequently, a multiple decontamination strategy was implemented to achieve high decontamination rates and low residual radioactivity. Within the actual cleaning time of 30 min, the decontamination efficiency (DE) of UO3-contaminated specimens reached 97.8% and 93.0% for U3O8-contaminated specimens. Simultaneously, the radioactivity levels of all specimens were reduced to below the control level for reuse in the nuclear domain. Particularly, the actual radioactive waste from the nuclear industry reached a reusable level of radioactivity after decontamination. The NaOH–Na2CO3–NaCl melt outperforms conventional chemical solvents and may be one of the most rapid and efficient decontaminants for stubborn uranium contamination of metal surfaces, which provides insights in regard to handling nuclear waste.