Abstract
MXenes are a group of two-dimensional materials that are promising for many applications, including as film electrode supercapacitors. When synthesizing such materials, special attention is paid to the conditions for obtaining the MAX phase, the chemical, morphological and structural features of which determine the functional properties of the final product. In this study, the Ti3AlC2 precursor is proposed to be obtained using a technologically simple and accessible method of synthesis in molten salt. This method allows reducing the reaction temperature and creating an antioxidant atmosphere. Ti3C2Tx MXene electrode films are produced by the easily scalable blade coating method without a binder. The synthesized materials were studied by X-ray phase analysis and scanning electron microscopy. Electrochemical testing of Ti3C2Tx film electrodes was carried out in a three-electrode configuration in aqueous solutions of 1M H2SO4, 6M KOH, 1M LiOH and 1M Na2SO4 electrolytes. The maximum specific capacity value for Ti3C2Tx MXene binder-free film electrode supercapacitors is obtained in 1M H2SO4 electrolyte (480 F g-1 at a scan rate of 1 mV s-1). The simple, low-cost and scalable production technology and promising electrochemical characteristics of the Ti3C2Tx MXene binder-free film electrode make it an excellent candidate for new-generation supercapacitors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.