Abstract

AbstractConversion of biomass waste into nitrogen‐doped porous carbon has been considered as a promising approach to achieve energy storage materials. Nitrogen‐doped activated carbon materials have been successfully prepared by molten salt pyrolysis (MSP) using melamine modified‐denim fabric waste as precursor. The molten salt medium provides liquid condition to carbonize and activate the denim fabric waste. Melamine produces a large amount of nitrogen element for doping the carbon materials. The obtained nitrogen‐doped denim fabric‐based carbon materials (NDFC‐MSP) are composed of small fibrous fragment and thin sheet, and exhibit a high specific surface area (1975.2 m2⋅g−1) and high pore volume (1.087 cm3⋅g−1). Moreover, NDFC‐MSP sample with a high nitrogen content of 6.93 wt.% possesses a maximum specific capacitance of 345.8 F⋅g−1 at 0.25 A⋅g−1 in 6 M KOH electrolyte. It also displays a high specific capacitance of 230 F⋅g−1 at 10 A⋅g−1. The cycle stability shows 95.5% retention after 5000 charge‐discharge cycles at 1 A⋅g−1. In addition, the fabricated symmetric NDFC‐MSP supercapacitor with a wide voltage range of 1.8 V generates a maximum energy density of 17.0 Wh⋅kg−1 at power density of 225 W kg−1 in 1 M Na2SO4 aqueous electrolyte.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.