Molecular properties of hemicelluloses located in the surface and inner layers of hardwood and softwood pulps

Abstract

The molecular properties of hemicelluloses located in the surface and inner layers of fibers present in hardwood and softwood pulps, together with the effects of different bleaching processes on these properties, have been investigated in this study. In order to separate the hemicelluloses located in these two layers, fibers were subjected to mechanical peeling and then separated by filtration into surface (filtrate) and inner layer materials. The materials thus obtained were characterized with respect to their polysaccharide compositions and uronic acid contents. The molar mass parameters of the hemicelluloses (extracted by alkali) were determined by employing size-exclusion chromatography in combination with off-line MALDI mass spectrometry. For all of the pulps examined, the relative content of xylan was found to be greater in the surface layer of the fiber than in the corresponding inner layer. The xylan polymers of the surface layer exhibited higher molar masses and lower frequencies of uronic acid side groups than did the xylans in the inner fiber layer. In connection with ozone treatment, hexenuronic acid residues in the surface layer xylan were removed to a greater extent than in the case of the inner layers, indicating a gradient for the reaction with ozone across the fiber wall. The xylan polymer remaining on the surface of the softwood pulps after completion of the chlorine dioxide bleaching process was predominantly uncharged.