Abstract
The development of new processes for depositing thin organic films has seen a renewed interest due to an increased demand for nanoelectronic devices. Tools for producing these devices, such as advanced lithographic patterning, often require ultrathin films with a high degree of compositional homogeneity. Molecular layer deposition (MLD) is a promising method for creating films with these qualities. By using an alternating sequence of self-saturating reactions, MLD can produce conformal films with a high degree of control over the composition and thickness. In a series of studies by our group, photoresist films were grown using MLD by incorporated acid-labile groups into a MLD-grown polyurea chain. The inclusion of photo acid generators was demonstrated both as a soaked-in additive as well as a polymer-bound reactive group. These films show potential as good photoresist materials, with some designs exhibiting sensitivities of 30 µC/cm2 with 100 kV electron beam exposure, and a line resolution of sub-100 nm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.