Abstract

In this study, the reverse osmosis (RO) of a salt solution was investigated using a molecular dynamics method to explore the performance of a multilayer porous graphene membrane. The effects of the salt solution concentration, pressure, layer separation and pore offset on the RO performance of the membrane were investigated and the influences of the number of layers and the gradient structure were determined. The results show that as the salt solution concentration increases, the energy barrier of the water molecules passing through the bilayer porous graphene membranes changes slightly, indicating that the effect of the water flux on the membrane can be ignored. The salt rejection performance of the membrane improves with an increase in the concentration of the salt solution. When the pressure is increased, the energy barrier decreases, the water flux increases and the salt rejection decreases. When the layer separation of the bilayer porous graphene membrane is the same as the equilibrium spacing of the graphene membrane, the energy barrier is the lowest and the membrane water flux is the largest. The energy barrier of the bilayer porous graphene membrane increases with increasing layer separation, resulting in a decrease in the water flux of the membrane. The salt rejection increases with increasing layer separation. The water flux of the membrane decreases as the energy barrier increases with increasing pore offset and the salt rejection increases. The energy barrier effect is more pronounced for a larger number of graphene layers and the water flux of the membrane decreases because it is more difficult for the water molecules to pass through the porous graphene membrane. However, the salt rejection performance improves with the increase in the number of layers. The gradient pore structure enhances the energy barrier effect of the water molecules permeating through the membrane and the water flux of the membrane decreases. The salt rejection performance is improved by the gradient pore structure. The research results provide theoretical guidance for research on the RO performance of porous graphene membranes and the design of porous graphene membranes.

Highlights

  • Desalination is a process that removes mineral components from sea water and has become an important technology to solve the lack of fresh water resources

  • The water flux of the material has only increased about two-fold in the past 20 years and the performance of commercial reverse osmosis (RO) membranes such as cellulose acetate membranes and polyamide membranes has not improved significantly in terms of selectivity and permeability [8,9,10]

  • The results of this study provide an improved understanding of RO of a salt solution using multilayer graphene membranes and theoretical guidance for the preparation of a RO membrane using graphene

Read more

Summary

Introduction

Desalination is a process that removes mineral components from sea water (accounting for 97.5% of global water resources) and has become an important technology to solve the lack of fresh water resources. Nanomaterials have been evaluated as RO membranes to improve the salt ion rejection and water flux [14,15]. Researchers have found that single-layer porous graphene membranes result in high salt ion rejection and a high water flux [17,18].

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call