Abstract
Based on Molecular Dynamics (MD), construct a crystallization model of Ni-Fe alloy and an amorphous model by simulating atomic deposition, stretch the models with the X axis and got the stress-strain curve. It is clearly observed that the maximum strain of the crystallization model is 0.25, and the maximum bearing stress is 450 MPa, it is fits perfectly with the objective reality data; the maximum strain of the amorphous model is about 0.3, and the maximum stress is 480 MPa, its ductility significantly higher than the crystallization model. In addition, by changing the temperature, it can be found easily that the maximum stress of the model is decreasing and the maximum strain is increasing. This indicates that under the influence of temperature, the hardness of the Ni-Fe alloy will decrease by 14%, while the ductility and toughness will increase by 7.7% with a temperature change of 150 K.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.