Abstract

We use conduction atomic force microscopy (CAFM) to examine the soft breakdown of monocrystalline hexagonal boron nitride (h-BN) and relate the observations to the defect generation and dielectric degradation in the h-BN by charge transport simulations and density functional theory (DFT) calculations. A modified CAFM approach is adopted, whereby 500 × 500 nm2 to 3 × 3 μm2 sized metal/h-BN/metal capacitors are fabricated on 7 to 19 nm-thick h-BN crystal flakes and the CAFM tip is placed on top of the capacitor as an electrical probe. Current–voltage (I-V) sweeps and time-dependent dielectric breakdown measurements indicate that defects are generated gradually over time, leading to a progressive increase in current prior to dielectric breakdown. Typical leakage currents are around 0.3 A/cm2 at a 10 MV/cm applied field. DFT calculations indicate that many types of defects could be generated and contribute to the leakage current. However, three defects created from adjacent boron and nitrogen monovacancies exhibit the lowest formation energy. These three defects form molecular bridges between two adjacent h-BN layers, which in turn “electrically shorts” the two layers at the defect location. Electrical shorting between layers is manifested in charge transport simulations, which show that the I-V data can only be correctly modeled by incorporating a decrease in effective electrical thickness of the h-BN as well as the usual increase in trap density, which, alone, cannot explain the experimental data. An alternative breakdown mechanism, namely, the physical removal of h-BN layers under soft breakdown, appears unlikely given the h-BN is mechanically confined by the electrodes and no change in AFM topography is observed after breakdown. High-resolution transmission electron microscope micrographs of the breakdown location show a highly localized (<1 nm) breakdown path extending between the two electrodes, with the h-BN layers fractured and disrupted, but not removed.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call