Abstract
Epitaxial growth of Zn1−xMgxS alloy thin films on GaP(100) substrates was carried out using the molecular-beam-epitaxy technique. In situ reflection high-energy electron diffraction studies show that the alloys can be grown with a stable zinc-blende structure up to x around 30%. For x>30%, a structural transition will occur at a critical thickness which is sensitively dependent on the x composition. A near-band-edge peak with a full width at half maximum of about 10 nm was observed in room-temperature photoluminescence measurements made on as-grown alloy thin films. Several Zn1−xMgxS-based Schottky barrier photodetectors were fabricated. Room-temperature photoresponse measurements were performed on these detectors and abrupt long-wavelength cutoffs covering 325, 305, 295, and 270 nm were achieved for devices with Mg composition of 16%, 44%, 57%, and 75%, respectively. The response curve of the Zn0.43Mg0.57S device offers a close match to the erythemal action spectrum that describes human skin sensitivity to UV radiation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.