Molded high curvature core-aligned micro-lenses for single-mode fibers.

Abstract

A polymer-based fiber micro-lens molding fabrication technique with, to our knowledge, unprecedented performances is presented along with its advantages and applications. This technique is a fast and affordable tool to achieve a wide variety of possible spherical and aspherical micro-lens sizes and curvatures. The alignment of the micro-lens mold with the fiber core receiving the lens is done optically, which allows high precision. Using the proposed technique, different micro-lenses are fabricated. Then the output beams of two different micro-lenses on single-mode fibers are characterized. Fiber micro-lenses with curvature as small as 5 µm are achieved. This shows how low curvature micro-lenses can achieve collimation and how high curvature ones on single-mode fibers lead to high focusing (FWHM=λ) that is much smaller than what most conventional commercial techniques can reach. Given that this technique imposes no stress and causes no damage to the fiber receiving the micro-lens, it presents a significant potential for compatibility with non-silica-based and micro-structured fibers such as photonic crystal and quasi-crystal fibers.