Moiré interferometry measurements of neartip deformation in inhomogeneous elasticplastic fracture specimens

Abstract

Moiré interferometry was used for direct measurements of the crack tip behavior in the homogeneous compact tension (CT) specimens of A533B and HT80 steels, and in electron-beam welded inhomogeneous CT specimens of the two materials. These two materials have considerably different yield stresses, although their elastic properties are the same. Five types of homogeneous and inhomogeneous specimens were used in the experiment. Moiré fringe patterns of the five specimen types were directly compared for elastic, elastic-plastic and unloaded stages. Although the global deformations in terms of the load versus COD relations exhibit little inhomogeneity effects, large inhomogeneity effects were observed in the moiré fringe patterns in the elastic-plastic and unloaded stages. The near-tip deformations were also compared with the corresponding HRR singular fields. In a horizontal weld specimen, due to strong hardening in the weld region, the slope of the displacement field does not shift the characteristic HRR field for the A533B or the HT80 steel for increasing load.