Abstract

The need for the modification of filtration properties of rock media (most frequently porous rocks) appears frequently, e.g., in hydrocarbon exploitation. Exploitation of crude oil and natural gas is frequently accompanied by an excessive and uncontrolled inflow of reservoir water to the production well, which often results in a significant reduction of hydrocarbon production in the late period of reservoir exploitation. The control of water inflow, through modification treatments of rock filtration properties of the near wellbore zone, is the solution to this problem. The use of dedicated treatment fluids is the basis of such success, which, after the injection and change of original physicochemical properties, create local insulation barriers, enabling the control of the flow of fluids in the geological formation. This paper presents the results of the laboratory assessment of the technological effectiveness of Multizol micellar treatment fluid, which is used for selective blocking of the reservoir water inflow to gas wells. Tests performed, at a preliminary stage, comprised the development of a procedure, the obtaining of samples of the treatment fluid, and the performance of flow tests in test glass tubes, which allow for a swift determination of the technological range of the fluid's capability to form gel and emulsion. Flood tests were the main element of testing, related to the measurement of pressure drops of fluids flowing through the sample under the simulated reservoir conditions. The tests were carried out using two types of media, porous rocks (Szydłowiec sandstone) and sand packs. The determination of the modification degree of filtration properties, both in individual zones and in the entire sample/model, was based on the value of the FRR (Residual Resistance Factor) coefficient, being the measure of their permeability reduction. Two types of tests were performed to assess the effect of Multizol treatment fluid on the initial filtration properties of gas and water-bearing zones.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call