Modifying the resin type of hybrid anion exchange nanotechnology (HAIX-Nano) to improve its regeneration and phosphate recovery efficiency

Abstract

In order to avoid eutrophication of freshwater systems, regulations all around the world have become increasingly stringent toward the maximum phosphate concentration allowed in wastewater discharges. Traditional phosphate removal methods such as chemical precipitation and enhanced biological phosphorus removal struggle to lower phosphate levels to the new requirements. Hybrid anion exchange nanotechnology (HAIX-Nano) is composed of a selective adsorption material able to remove phosphate down to levels close to zero. Moreover, HAIX-Nano is not affected by intermittent flow and does not produce sludge making it an interesting alternative. The regeneration process of HAIX-Nano typically requires a chemical solution with a high concentration of sodium hydroxide (NaOH) and sodium chloride (NaCl) (2–5% w/w of each). To lower the environmental impact and the operational cost of the technology, this study aims to enhance the HAIX-Nano regeneration efficiency. Therefore, the backbone of HAIX-Nano, which is normally a strong base anionic (SBA) resin, was changed for a weak base anionic (WBA) resin. The resulting material (WBA-2) exhibited a higher adsorption capacity than the traditional version of HAIX-Nano (SBA-1) under the tested conditions, while also showing a much higher regeneration efficiency. For a desorption solution of only 0.4% NaOH and no NaCl, WBA-2 showed an average regeneration efficiency of 78 ± 1% compared to SBA-1 with 24 ± 1%.