Abstract
The TRUEX process has been examined to recover Am and Cm from the high-level liquid waste of Purex reprocessing plant. Continuous counter current extraction and back-extraction experiments were carried out by a mixersettler using simulated waste solution for three process flowsheets, i.e. a process flowsheet developed by Argonne National Laboratory and other two process flowsheets which were modified in the scrub stage. The result indicates that the process flowsheet of Argonne National Laboratory cannot be applied for the high-level liquid waste containing high concentrations of lanthanide and actinide elements because of the formation of insoluble salts of these elements with oxalic acid, which is added to restrict the extraction of fission products such as Mo and Zr. A modified process flowsheet, which had only one scrub stage with high concentration of nitric acid, was found to be the best of three process flowsheets examined, where Nd as a simulated element of Am and Cm was sufficiently recovered and any precipitation of oxalate salt was not observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.