Modified state parameter for characterizing static liquefaction of sand with fines

Abstract

An experimental study was carried out to investigate the static liquefaction behaviour of sand with a small amount of plastic and nonplastic fines. Five series of tests were conducted in drained and undrained conditions. The drained test results indicate not only that the failure line coincides with the critical state, but also that the development of volumetric strain during shearing was not sensitive to the initial confining pressure. In both isotropically and anisotropically consolidated undrained tests, a so-called “reverse behaviour” was consistently observed. The results were also interpreted in the critical state framework. The critical and steady state (CS/SS) data were found to trace along the same curve in e–log( p′) space, irrespective of the stress history and effective stress paths. A comparison between the isotropic consolidation line (ICL) and critical state (CS) curve showed that a small amount of fines can significantly change the shape and position of the ICL relative to the CS curve. Furthermore, the soil behaviour manifested in both drained and undrained shearing led to the development of a modified state parameter.