Modified sodium alginate-based three-dimensional network hydrogel dust suppressant: Preparation, characterization, and performance

Abstract

Chemical dust suppression is typically associated with high economic costs, unclear efficacy, and poor degradability. In this study, sodium alginate (SA) was extracted from kelp and cross-linked with polyvinyl alcohol (PVA) and polyacrylamide (PAM). Sulfonated castor oil (CAS) was subsequently added to generate a three-dimensional network hydrogel dust suppressant (PVA-SA-PAM/CAS). Using single-factor experiments, the optimal reaction temperature (60 °C) and dosages of PVA, PAM, and the cross-linking agent (2.5, 4.5, and 0.1 g, respectively) were determined. The viscosity and compressive strength of the prepared hydrogel were 86 mPa·s and 218 kPa, respectively, which meet the requirements for mine dust suppression. Various analyses revealed the hydrogel's reaction process and microstructure changes. Additionally, thermogravimetric experiments proved that the hydrogel had good thermal stability. The specific surface area and pore size of the hydrogel were 0.0278 m2/g and 11.8 nm, respectively, improving its adsorption capacity. Additionally, PVA-SA-PAM/CAS exhibited a good water retention rate. The dust suppression efficiency of PVA-SA-PAM/CAS was >98 % under strong winds (12 m/s). Moreover, the degradation rate of PVA-SA-PAM/CAS was 37 % after eight cycles (56 d) under environmental conditions. Therefore, PVA-SA-PAM/CAS exhibits good wetting, dust suppression, and degradation properties, which can effectively alleviate mine dust pollution.