Modifications to microplastics by potassium ferrate(VI): impacts on sorption and sinking capability in water treatment.

Abstract

Pre-treatment (oxidation) may induce potential modifications to microplastics (MPs), further affecting their behaviors and removal efficiency in drinking water treatment plants. Herein, potassium ferrate(VI) oxidation was tested as a pre-treatment for MPs with four polymer types and three sizes each. Surface oxidation occurred with morphology destruction and oxidized bond generation, which were prosperous under low acid conditions (pH 3). As pH increased, the generation and attachment of nascent state ferric oxides (FexOx) gradually became dominant, making MP-FexOx complexes. These FexOx were identified as Fe(III) compounds, including Fe2O3 and FeOOH, firmly attaching to the MP surface. Using ciprofloxacin as the targeted organic contaminant, the presence of FexOx enhanced MP sorption dramatically, e.g., the kinetic constant Kf of ciprofloxacin raised from 0.206 (6.5μm polystyrene) to 1.062 L g-1 (polystyrene-FexOx) after oxidation at pH 6. The sinking performance of MPs was enhanced, especially for small MPs (< 10μm), which could be attributed to the increasing density and hydrophilicity. For instance, the sinking ratio of 6.5μm polystyrene increased by 70% after pH 6 oxidation. In general, ferrate pre-oxidation possesses multiple enhanced removals of MPs and organic contaminants through adsorption and sinking, reducing the potential risk of MPs.