Abstract
The influence of the loaded zinc chloride content (0–11 wt %, dry sample basis) on the pyrolysis of beechwood particles packed in a bench-scale bed was studied. Given an external heating temperature of 655 K, the temporal profiles of the thermal field showed maximum values progressively increasing from 683 to 790 K as the catalyst content was increased from 0 to about 5 wt %. Based on cumulative char and water yields increasing from about 51 to 70 wt % and yields of condensable organics decreasing from about 35 to 15 wt %, the enhancement in the global exothermicity of the conversion process can be attributed to the successive predominance of dehydration with cross-linking reactions over depolymerization reactions. The exothermic effects were found to be qualitatively similar to but quantitatively lower than those associated with a sulfuric acid treatment. For higher acid contents and both additives, the noncatalytic effects associated with their loading were also found to contribute significantly to the ...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
