Modification of the liquefaction potential index and liquefaction susceptibility mapping for a liquefaction-prone area (Inegol,Turkey)

Abstract

Although some liquefaction assessment methods were proposed to evaluate the liquefaction potential of sandy soils, the conventional method based on the standard penetration test (SPT) has been commonly used in most countries and in Turkey. However, it alone is not a sufficient tool for the evaluation of liquefaction potential. The liquefaction potential index was proposed to quantify the severity of liquefaction. Nevertheless, the liquefaction potential index and the severity categories do not answer the question: "Which areas will not liquify?" Besides, the categories do not include a "moderate" category; on the other hand, the "high" and "low" categories are included. This situation is also contrary to the nature of classification schemes. In this study, the liquefaction potential index and the liquefaction potential categories were modified by considering the existing form of the categories based on the liquefaction potential index. While the category of low was omitted, the categories of moderate and "non-liquefied" were adopted. A factor of safety of 1.2 was assumed as the lowest value for the liquefaction potential category of non-liquefied. In addition, the town of Inegol in the Marmara region became the case study for checking the performance of the liquefaction potential categories suggested in this study.