Modification of the cyclone separator geometry for improving the performance using Taguchi and CFD approach

Abstract

ABSTRACTThe cyclone separator performance has been affected by its high-pressure drop. The main geometric ratios such as outlet diameter, inlet width and inlet height and total height have been preferred to reduce the pressure drop and improve the performance of cyclone separator. These standard geometric values have been altered with the aid of design of experiment technique by Taguchi method for reducing the pressure drop. This changed new design produce low-pressure drop compared with the standard cyclone separator. Moreover, the collection efficiency of the new design is high when compared with standard cyclone separator. The pressure drop, Euler number, cut-off diameter and efficiency of the standard and new cyclone separator have been compared with the results of mathematical and computational fluid dynamics technique (CFD). The Reynolds stress turbulence model and discrete phase model have been used for simulating the cyclone separator in CFD. An acceptable agreement has been obtained between these results.