Abstract
In this study, it was evaluated the potential use of commercial sodium bentonitic clay, called Fluidgel, chemically and thermally treated, as an adsorbent in the removal of zinc ions from aqueous effluents. The chemical treatment was carried out with 10 g of clay dispersed in 100 mL of acetic acid 4 %. The heat treatment was obtained by calcination at 750 °C for 24 hours in muffle. The adsorption experiments were performed in thermostatic bath system and fixed bed, both based on preliminary study of metallic cationic speciation. The kinetics of zinc ions adsorption by acid-treated clay was rapid, requiring a minimum time of 60 min to reach equilibrium. The adsorbed amount and percentage of total zinc removal, at equilibrium time, was 0.06 mmol/g and 45 %, respectively, using the acid-treated clay. There was no removal of zinc by Fluidgel calcined clay in bath system, but in fixed bed it was obtained the total amount of zinc removal of 0.11 mmol/g and 41 % of percentage of removal.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
