Abstract
In this study, modification of polysulfone (PSf)/sulfonated polysulfone (SPSf) blended porous ultrafiltration (UF) support membranes was proposed to improve the reverse osmosis (RO) performance of aromatic polyamide thin film composite (TFC) membranes. The synergistic effects of solvent, polymer concentration, and SPSf doping content in the casting solution were investigated systematically on the properties of both porous supports and RO membranes. SEM and AFM were combined to characterize the physical properties of the membranes, including surface pore natures (porosity, mean pore radius), surface morphology, and section structure. A contact angle meter was used to analyze the membrane surface hydrophilicity. Permeate experiments were carried out to evaluate the separation performances of the membranes. The results showed that the PSf/SPSf blended porous support modified with 6 wt % SPSf in the presence of DMF and 14 wt % PSf had higher porosity, bigger pore diameter, and a rougher and more hydrophilic surface, which was more beneficial for fabrication of a polyamide TFC membrane with favorable reverse osmosis performance. This modified PSf/SPSf support endowed the RO membrane with a more hydrophilic surface, higher water flux (about 1.2 times), as well as a slight increase in salt rejection than the nascent PSf support. In a word, this work provides a new facile method to improve the separation performance of polyamide TFC RO membranes via the modification of conventional PSf porous support with SPSf.
Highlights
Reverse osmosis (RO), with excellent separation performance, is one of the most efficient membrane filtration techniques and has been widely used to produce fresh water from saline water [1,2,3,4,5,6]
The conventional PSf ultrafiltration membrane was successfully modified by doping with sulfonated polysulfone (SPSf) via the phase inversion method and the polyamide RO membranes were further prepared based on the resultant PSf/SPSf blended porous support via interfacial polymerization technology
NMP, DMAc, and DMF were selected as the solvents of the polymer PSf with concentrations in the range of 16–24 wt % to prepare the casting solution, on the basis of which, the effects on the porous supports and corresponding RO membranes were investigated in detail
Summary
Reverse osmosis (RO), with excellent separation performance, is one of the most efficient membrane filtration techniques and has been widely used to produce fresh water from saline water [1,2,3,4,5,6]. Aromatic polyamide thin film composite (TFC) membrane fabricated by interfacial polymerization (IP) has been the mainstream product in the RO membrane market. Porous support, and the top skin layer is the aromatic polyamide film. This composite structure makes it convenient to tailor the porous support layer and polyamide film independently to optimize the RO membrane’s properties. Factors including chemical and physical properties of the porous support, the component of the monomer used in IP process, catalysts and additives, the craftsmanship of IP and post-treatment were adjusted to reconcile the natures of the polyamide TFC membrane, such as chemical structure, physical properties and separation performance [7,8]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have