Abstract
In order to increase the hydrophilicities, thereby to impart soil resistance and to improve dyeability, poly(ethylene terephatalate) (polyester) fabrics were treated in low‐temperature plasmas. Two alternative modifications were applied. Fabrics were directly treated in acrylic acid plasma in one investigation, while in the other they were first treated in argon plasma and then immersed in an aqueous acrylic acid bath. The plasma conditions (i.e. exposure time and discharge power) were changed to control the extent of plasma surface modification in the first approach, while the acrylic acid content and the incubation time were changed in the second procedure. The wettability, and therefore the dyeability and soil repellency, of polyester fabrics was significantly improved by both methods. The second method resulted in better dyeability and soil repellency in contrast to lower surface wettability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.