Abstract
We applied a laser-surface melting treatment to AISI M2 high-speed steel – hardened and tempered – and studied the resulting surface characteristics (microstructure) and mechanical behaviour (hardness and wear performance). The steel was treated using a Nd:YAG continuous-wave laser with different operation conditions. The influence of the laser processing parameters on the individual beads and on the characteristics of the molten surface layer obtained using the multipass system with 50% overlap was studied. The microstructure characterization for all conditions is formed of MC- and M2C-type carbides, martensite, and retained austenite; the quantities of this phase depend on the operating conditions. It has been determined that low levels of power density and high scanning speeds of the beam lead to greater homogeneity in the microstructure with high hardness values and wear resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.