Abstract
AbstractA fundamental requirement for analysing timber structures under fire is to consider the degradation of material properties with temperature. Therefore, the objective of this study is to propose a model that accounts for the variation of the thermo-physical properties, the development of char, and its evolution with temperature. This model integrates a sequential coupling of heat transfer analysis with structural response. The degradation of the material properties is accounted for through the regulatory approach recommended in Eurocode 5. The stress analysis employs an elasto-plastic model with nonlinear isotropic hardening. Implementation of the model is achieved within the Abaqus suite of finite element software using external subroutines. The model's predictions align well with experimental data, accurately reproducing both thermal and structural responses. Specifically, the model accurately predicts temperature profiles, displacements, and the depth of the charred layer, which initiates above 300 °C. Additionally, for rectangular sections, it was observed that exposure of all faces to fire results in a non-rectangular residual section. Furthermore, employing the temperature-dependent thermal property curves suggested by EC5 yields satisfactory results when predicting the fire resistance of softwood timber structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.