Abstract
The aim of this study was to model the effect of pigment, binder and fixer concentrations on the rubbing fastness, crease recovery, tear strength and stiffness of pigment‐dyed polyester/cotton sheeting fabrics. The design and analysis of experiments were carried out using Minitab® statistical software according to the central composite design of response surface methodology. It was found that an increase in the binder concentration significantly improves the dry rubbing fastness, crease recovery and stiffness of the fabric, with a corresponding decrease in fabric tear strength, without significantly affecting the wet rubbing fastness. An increase in the fixer concentration significantly improves both the dry and wet rubbing fastness and crease recovery, with a decrease in fabric tear strength and stiffness. The effect of binder and fixer concentrations on crease recovery was not linear and there was significant negative interaction between these factors for dry rubbing fastness. The effect of pigment concentration was not found to be statistically significant for the types and range of concentrations of pigment, binder and fixer used in this study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.