Abstract
PurposeThe purpose of this study is to develop a model extending Oriani’s formula by introducing a normalised concentration to simulate hydrogen diffusion in a multi-material system such as coated steels, under the presence of traps.Design/methodology/approachImplemented through the finite element method based on the analogy between mass diffusion and heat transfer, the governing equation was applied to investigate the combined effects of hydrogen traps and surface oxide films on hydrogen permeation in ferritic steels.FindingsThis study shows that the effective diffusivity varies over several orders of magnitude depending on the traps and films. This explains the divergence of measured hydrogen diffusivities in steels. It is revealed that hydrogen permeation in steels with Pd or Ni film is a trapping-dominant transport process, while hydrogen permeation in steel with oxide film is a process controlled by both trapping effect and retarding effect of oxide film. The oxide film enhances total hydrogen concentration within the steel substrate and is therefore detrimental. The Pd or Ni film has a little influence on total hydrogen concentration distribution depending on trapping energy.Originality/valueHydrogen flux curves and transient hydrogen concentration distributions can be directly obtained through the developed model. The proposed approach can also be extended to investigate other interstitial (i.e. carbon, oxygen and nitrogen) diffusion with traps revisited in complex systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have