Modelling real contact areas caused by material straining effects in sheet metal forming simulation

Abstract

Shortened product development processes in automotive industry combined with the upcoming lack of experts do challenge sheet metal part production fundamentally. Tryout time and manufacturing costs of large forming dies today are significantly influenced by their digitally supported engineering. The forming process by such tools is beside other influences is affected by elastic deformations of forming dies and press structure as well as contact areas between die and sheet metal part. In deep drawing such contact areas are influenced by the blank properties and the flange behavior in terms of thickening and thinning. Recent developments in sheet metal forming simulation do consider advanced friction models and structural modeling of die and press components improving simulation accuracy. Nevertheless thinning or thickening of sheet metal results into localized surface pressure distribution during deep drawing. For this reason, it is not sufficient to use the currently common practice of homogeneous surface pressure distribution in sheet metal forming simulation. In this respect, this paper presents a numerical approach for consideration of straining effects in the sheet metal part during forming operation. For this purpose, a systematic process improvement was developed in this paper to identify contact areas via a numeric simulation parameter. Validating the numerical investigation, a rectangle cup die is used, considering major strain. The main results of this contribution for that reason show how simulated contact areas can be estimated by reverse engineering of real forming parts. Hereby straining based contact areas lead to a novel contact area design in process planning, resulting in efficient die tryout.