Modelling of porous core–shell adsorbent particles with various morphologies suspended in batch adsorber from analytical solutions of diffusion equations

Abstract

AbstractConsidering both intra‐particle diffusion and film resistance for mass transfer, analytical solutions of transient concentration of adsorbate inside adsorbents with spherical, cylindrical, or slab‐type particles were derived for batch adsorbers by solving governing equations using the Laplace transform. Assuming Henry's or rectangular isotherm, the average concentration inside adsorbents as well as transient bulk concentration were also obtained for the particles with or without the inert core. Computations were performed to compare the results according to the shape of adsorbents by adjusting adsorbent loading, Biot number (Bi), and inert core thickness. Regardless of particle morphologies, steady‐state bulk concentration was only affected by adsorbent loading and inert core thickness, whereas the effect of Bi was confirmed from the decreasing reduction rate of adsorbate concentration with decreasing Bi. When diffusivity was dependent on time, time‐decaying diffusivity caused the increase in steady‐state concentration that was predicted by eigenfunction expansion. Experimental results using porous fibres by electrospinning were compared with the mathematical solution of a cylindrical adsorbent for the estimation of intra‐particle diffusivity. Using the solutions of the diffusion equation model, novel core–shell cylindrical adsorbents can be designed and synthesized as core–shell fibres by electrospinning with a coaxial nozzle to save the cost of the active shell layer. Such core–shell structured fibres can be adopted as adsorbents for novel batch adsorption processes and the present modelling results can be extended to other processes like fixed bed adsorbers.