Abstract
This paper provides an analysis of experimental research results and numerical simulation of grain microstructure of turbine blade castings made of the IN-713C nickel superalloy. The numerical simulation was carried out by applying the ProCAST program. The geometric description of model assemblies and three-dimensional ceramic mould enclosure was developed. The boundary conditions as well as the thermal and physical coefficients for alloy and ceramic shell mould were selected for simulation purposes. The parameters of nucleation law based on normal (Gaussian) distribution as well as the values of equation coefficients were established in order to determine the growth rate of dendrite tips for the IN-713C alloy, depending on the undercooling. The experimental verification of boundary conditions for numerical simulation was carried out by comparison with the results of temperature distribution measurements performed in the castings. The analysis of grain microstructure was conducted on the surface and cross-sections of castings. The forecasted grain microstructure was determined using the CAFE module (ProCAST software). The cast microstructure as well as the value of grain growth and nucleation coefficients, which were used for numerical simulation of solidification process, were experimentally verified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
