Modelling of extractive heterogeneous-azeotropic distillation in dividing wall column

Abstract

Abstract The distillation based separation can be extremely complex if highly non-ideal mixtures are to be separated. In spite of different successfully applied unit operations there is always a possible way to improve the distillation technique and widen its toolbar. A novel improvement in this area is the development of the extractive heterogeneous-azeotropic distillation (EHAD). For the sake of the demonstration of the efficient use of EHAD in Dividing wall columns (DWC), two quaternary mixtures are selected for separation: Water – Ethanol – Ethyl acetate – Acetone and Water – Ethanol – Ethyl acetate – Ethylene glycol. There are real waste mixtures from pharmaceutical industry. It must be mentioned, extractive heterogeneous-azeotropic distillation method has never been investigated in dividing wall columns. Conventional distillation column sequences and dividing wall columns are selected for comparison. Rigorous steady-state simulations are carried out using ChemCAD flowsheet simulation software. Number of trays, heat duties and Total Annual Cost (TAC) of the systems are optimized. It can be concluded, the application of the EHAD in DWCs allows also the simplification of the separation schemes and the separation reduces the energy requirements of the distillation and opens new horizons for the separation of non-ideal mixtures saving energy, money and natural resources. Using DWCs the reboiler duties can be reduced with 20% and the appropriate separation can be reached with one less column.