Modelling of corona discharge in cylinder-wire-plate electrode configuration

Abstract

Numerical computation of the electric field strength and ionic space charge density in electrode systems consisting of ionizing wire and non-ionizing cylinder, connected to the same DC high-voltage supply and facing a grounded plate, is a difficult problem, which is of interest to several electrostatic processes applications. In a previous study a simple numerical method has been proposed to calculate the spatial distributions of electric field and ionic space charge in a case of a continuum and uniform corona discharge originating at the surface of the wire. The aim of the present paper is to improve the physical model of the corona discharge in this particular electrode configuration, by assuming a more realistic law of charge injection on the wire circumference. The computations were carried out for an ionizing wire of radius r=0.1 mm, located at different distances h from a metallic tubular support of radius R=13.4 mm.The initial conditions of the corona discharge took into account the non-uniformity of the charge injection around the ionizing wire electrode. The computational results were compared with those obtained under the assumption of uniform corona discharge. The comparison pointed out that neither the non-uniformity of the electric field nor that of the charge injection can be neglected. They depend on the geometry of the electrode system and affect the distribution of the electric field and of the space charge density in the inter-electrode gap.